PS1500 Abc Cable Suspension Clamp with bracket

PS1500 Abc Cable Suspension Clamp With Bracker

The suspension clamp is designed for the 

installation and suspension of four core self-supporting 

LV-ABC cables to poles or walls.

•  The clamp is made of hot-dip galvanized steel and 

   weather resistant  material 

•  Equipped with shear head bolt. The clamp can be easily  

installed without damage to the cable insulation 

•  No loose parts                  

•  Standard: EN 50483-2 

Design Requirements of Suspension Clamp

Apart from just worrying about the types of suspension clamps, you need to get into the outlook and functionalities of the clamp.

These two factors are defined by the design, mechanical and technical requirements of the pole line accessory.

A well-designed suspension clamp will ensure that there is a smooth coordination b with the cable and other components.

Some of the essential design aspects that you should focus on include:

-Anchor clamp: The anchor clamp, which is next to the conductor, should be able to move freely.

This design is achieved only if the trunnion of the clamp is part of the body.

-Design of straps: Before you buy a suspension clamp, ensure that its straps are round-shaped and their sizes match with the size of the trunnion.

-Conductor supporting groove: Ensure that the conductor supporting groove of a suspension clamp has the right measurements for your application.

On the other hand, the keeper should not have any sharp edges that can result in any irregularities.

-Bolts and Nuts: You should confirm the design requirements of bolts and nuts so that they can perfectly fit onto the suspension clamp when completing connections.

Ensure that the bolt of a suspension clamp can protrude through the threads.

What is a Suspension Clamp?

A suspension clamp is a fitting that is designed for suspending or hanging cables or conductors to the pole. In other cases, the clamp can suspend cables to the tower.

Since the cable is directly connected to the conductor, its specifications need to match with that of the cable so as to create a perfect connection.

A suspension clamp hangs the cables at different points and angles depending on the requirements of the project.